Sunday, October 2, 2016 at 11 am EST 

• 482. Exceptional silvered and gilt watch stand on base, Swiss, depicting William Tell the archer with standard bow rather than his legendary crossbow, on stand that accepts glass dome (now missing), overall height 7.75 inches. The dome would need internal dimensions of at least 7.5 inches height, width of 5 inches, and depth of 3 inches. The shape of the lower globe is in cartouche or stadium form. The lower section is silver-plated with dog's head at center, while the upper is gilt. The stand would hold an OF watch of no more than 44mm diameter and 16mm thickness. Estimate: $250 - $400
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $150
  
  
• 483. Champlevé and cloisonné enamel watch and jewelry holder, the latter with tufted silk interior under beveled glass, the watch hanging against a mirror, chaise-form design in gilt brass, height 10.5 inches, very unusual. Estimate: $250 - $350
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $160
  
  
• 484. Gilt brass watch holder with blue blown-glass basket receptacle, fully ground pontil, twisted wire construction with stamped leaves and flowers, height 9.5 inches. Estimate: $150 - $250
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $50
  
  
• 485. Napoleonic gilt brass watch holder, 9 inches tall, figure of Napoleon on podium, eagle at crest, accepts watch of less than 49mm diameter. Estimate: $150 - $250
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $100
  
  
• 486. Gilt brass watch holder with mixed blue, white and clear blown-glass basket receptacle with ruffled border, broken pontil, twisted wire construction with stamped tassels and shield with tufted cushion, height 7.5 inches. Estimate: $100 - $150
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $100
  
  
• 487. Bronze framed milk-glass egg-formed stand, double-holder within containing only two empty non-associated bottles, alabaster base, function unknown, height 6 inches. Estimate: $50 - $100
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $50
  
  
• 488. Large G Boley boxed watchmaker's double lathe set with two D-beds, one with integral face plate head-stock, compound slide rest and tool post, the other with traditional head-stock and two taper tail-stocks, one base, ring chucks, cutters, collets, Jacot attachments, box chuck, polishing attachment, carriers for turning between centers, and more accessories. Estimate: $1,000 - $1,500
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $1,100
  
  
• 489. Boxed Boley watchmaker's lathe with compound cross slide, concave and convex step chucks, collets and chucks, gravers, head and tail stocks, base, face-plate, and various accessories, fairly complete. Estimate: $700 - $1,000
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $750
  
  
• 490. Lot (3) Rounding-up tools and box of accessories, the two tools mounted on wooden bases, the box of accessories full of cutters and stumps plus a few runners - the accessories have not been tried in either machine, and might need adaptation for use. Estimate: $600 - $900
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $300
  
  
• 491. Lot (5) Unusual brass & steel tools - [1] Very rare verge escape wheel or contrate wheel cutting engine. [2] Standing tool for marking hole positions on upper plates to match lower plate. [3] Fusee engine. [4] Adjustable slide with mounting bracket. [5] Early roller remover, heavily built. Estimate: $600 - $900
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $700
  
  
• 492. Rounding-up tool on original single-drawer base with complete selection of cutters and stumps. Estimate: $600 - $900
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $300
  
  
• 493. Heavy and high quality 19th century mandrel lathe on solid cast iron base, with hand-crank, three-dog face-plate, T-rest, taper tailstock with threaded limiting block, and elegant oval thumbscrews, length as shown 17 inches, height 11 inches. Wing Collection. Estimate: $500 - $800
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $225
  
  
• 494. Rounding-up tool on original single-drawer base with partial selection of cutters and stumps, drive wheel with four serpentine spokes, overall height 11 inches. Wing Collection. Estimate: $500 - $800
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $300
  
  
• 495. Rounding-up tool on original single-drawer base with small selection of cutters. Estimate: $500 - $800
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $100
  
  
• 496. "Swiss chronograph instruction repair kit, created especially for Watchmaking Schools by Ebauches, SA, Neuchatel, Switzerland, presented with their compliments." The boxed kit contains three unused chronograph mvts in special clear plastic containers that are screwed together, equipped with crown, stems and buttons, without dials but with hands, and various parts for each that were organized in front of each, but are now jumbled together. The large central mvt is Valjoux 19-ligne cal 24 split-seconds chronograph timer only with constant seconds and minute recorder. On the left is 13.75-ligne Landeron cal 48, for wrist, and on the right the 14-ligne Venus version, cal 175. Estimate: $400 - $600
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $850
  
  
• 497. Lot (100) Domed and bull's-eye glass crystals, loose and unlabeled, mostly from 35mm to 45mm, only a handful above that range up to 55mm, hardly any below, mostly high-domed with only occasional flat domed. Wing Collection. Estimate: $300 - $600
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $650
  
  
• 498. Lot (6) Very unusual brass and steel tools - [1] Cylinder escape wheel dressing tool. [2] Special attachment for cutting escape wheel teeth on wheel cutting engine. [3] Ingersoll vibrating tool used with strobe light. [4] Small indexing device. [5] Uprighting tool. [6] Small mandrel lathe. Estimate: $400 - $600
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $300
  
  
• 499. Mandrel lathe mounted on oak base, hand cranked, integral face-plate, compound slide with tool post. Estimate: $400 - $600
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $225
  
  
• 500. Unusual rounding-up tool of unique design on original single-drawer base with small selection of cutters and stumps. Estimate: $400 - $600
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $180
  
  
• 501. Lot (3) Cabinets with parts, materials and unbreakable crystals - [1] Jessen & Rosberg, Chicago, oak 4-drawer cabinet with predominantly wristwatch material. [2] Two-part stacked metal sectional style drawer files with white alloy hairsprings and collection of hands, predominantly for pocket watches. [3] Electroglas wristwatch 2-drawer unbreakable crystal cabinet with contents. Estimate: $300 - $500
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $160
  
  
• 502. Luthy-Hirt, Bienne, Switzerland, boxed hairspring vibrating tool, glass table above balance for comparison of oscillation, release for simultaneous commencement of vibration, the best tool of its class. Estimate: $300 - $500
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $250
  
  
• 503. Early indexing plate made of clock dial chapter, mounted in heavy iron bracket. Estimate: $200 - $400
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $50
  
  
• 504. Four-drawer oak cabinet marked Macey with various wristwatch parts collections. Estimate: $200 - $400
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $100
  
  
• 505. Lot (2) Wooden 4-drawer crystal cabinets with traditional glass pocket watch crystals. Estimate: $200 - $400
  Click Here For Condition Report
  This Lot Sold On 10/2/2016 For $250